Enclosures for Lab Automation and Robotics
Executive Roles created to drive Market Expansion
New Cryo-TEM to Help Accelerate Drug Discovery Research
First Enterprise SaaS LIMS - Pre-Validated for Regulated Industries
LDIR Chemical Imaging System for Microplastics Analysis
“Everything we see is a perspective, not the truth”. This quote is attributed to Roman Emperor Marcus Aurelius and although he probably had something else in mind, this somewhat describes an effect that can occur in particle size and shape measurement. Dynamic image analysis is now an established and proven method for the characterisation of bulk solids and users of this technique benefit from short analysis times and high sample throughput, because the method can detect and measure hundreds of thousands or even millions of particles within a few minutes. However, the images are snapshots, showing each particle in one of many possible perspectives, so the third dimension remains hidden. What works well enough for the size measurement of irregularly shaped particles and many natural products such as sand, crushed rocks, abrasives, or sugar, reaches its limits when materials of a certain predefined geometry need to be measured as precisely as possible in terms of real width, thickness, length, and shape.
The CAMSIZER 3D adds new perspectives to particle analysis, revealing the truth about the morphology of your sample at last!
CAMSIZER 3D combines all the advantages of dynamic image analysis (ISO 13322-2) in a completely redesigned measuring system.
The instrument utilises a vibrating conveyor, LED strobe backlighting, and powerful highspeed and high-resolution cameras to perform the measurements.
As the particles enter the sensing zone, they execute a completely random tumbling motion as they fall.
During measurement, the particle stream passes by an ultra-bright LED area light source; the resulting shadow projections are recorded by a camera system.
Thanks to the large field of view and long drop distance, each particle is analysed up to 30 times, showing different perspectives, making the actual, three-dimensional particle morphology accessible for analysis.
This creates a track of individual images of the same particle showing different projections. The evaluation of this track provides the true width, thickness, and length of every object. This also increases the informative value of all shape parameters usually determined during image analysis, such as aspect ratio, circularity, convexity, compactness, symmetry, etc.
Extrudates like many plastic pellets or catalyst carrier rods have a defined base area given by design of the extruder and a variable length depending on the speed of extrusion and the setting of the cutting tool. The precise length measurement is an important quality marker and allows conclusions about the performance of the extruder. With the innovative 3D analysis method, the length of every particle projection of a 3D track is measured but only the largest of these numbers is used to calculate the length distribution. Thus, the correct length of every particle is determined, and the result is in perfect agreement with calliper measurement. Note that the length measured with the 2D-method, taking only one random image of every particle, is clearly ‘too short’.
Analysis results of cylindrical extrudates 2D vs. 3D. Length distribution shows that the 2D result is 'too short': particle images don’t show the correct length due to random orientation (left diagram). Accordingly, the aspect ratio in the 3D measurement is relatively constant at 0.4 and in the 2D measurement it shifted to higher values (right diagram).
The 3D method also allows to reliably detect defective particles deviating from the desired shape: To find broken or fused particles in a sample of spherical material, one random view at each particle is also not sufficient, because the defective particle can accidentally show a circular projection and thus look like a flawless object.
Particle size and shape are important parameters for fertiliser quality. During granulation, the pellets will be shaped as nearly round particles. A non-optimal process will first be recognised by a change in particle shape, as the granulate will be ellipsoidal rather than spherical. Note that the diameter will stay the same and it won’t be reported in the standard sieve analysis. By measuring the roundness and aspect ratio, the CAMSIZER 3D will detect even smallest changes of the particle shape. Note that some of the non-round pellets in the 3D track show round projections. In 2D analysis these would be mistaken for 'Good product'. However, the additional images from the 3D track reveal the true nature of these particles. A truly round pellet will show high roundness or aspect ratio on every image of the track.
The name CAMSIZER has long been synonymous with precise and reliable measuring technology. Of course, the CAMSIZER 3D also offers the proven dual camera technology which also enables the precise analysis of fine particles, an extremely wide measurement range as well as excellent compatibility of the results with sieve analysis. Two high-resolution and high-speed cameras guarantee accurate size and shape analysis over the entire measurement range. The unique, patented 3D technology enables more meaningful size results than ever before with the traditional 2D approach, opening applications that were not previously possible with dynamic image analysis.
Enclosures are designed to isolate liquid handling workstations, HPLC equipment, sample weighing, high throughput screening, powders handling and other lab a...
The new Verso® Q50 and Verso Q75 Automated Sample Storage Systems from Hamilton Storage offer compact, walkaway sample storage and access to decrease man...
Froilabo have announced the launch of a new range of fully automated lab-scale bioreactors. Expanding their portfolio of temperature-controlled laboratory eq...
Ellutia Chromatography Solutions can now offer a range of monthly payment options for UK customers looking to purchase a GC. Leasing or Hire Purchase means c...
In This Edition Chromatography - Eco-Friendly RP-HPLC - Replacing Acetonitrile with Isopropanol in analytical and purification utilising Core-Shell Chromatography - New Gas Chromatographs fo...
International Labmate Limited Oak Court Business Centre Sandridge Park, Porters Wood St Albans Hertfordshire AL3 6PH United Kingdom
T +44 (0)1727 858 840 F +44 (0)1727 840 310 E info@labmate-online.com
Copyright © 2022 Labmate Online. All rights reserved.